iSight Drivers...upated!!

[Bernard Asagai]

Hello Everyone:
 
So, for a few days I could not get the iSight to work
again on my 400MHz B&W G3. I was baffled for days.
Anyway, here is a simple solution I came up with. 
    
With the machine "Cold". Make sure the iSight is
disconnected. Push the Power Button and wait about
10-15 seconds until you hear the OS begin to load.
Once you hear it beginning to load, connect the iSight
to the FireWire port on your machine.
The Green light on your camera should come on, and
then go off.
    
Once your machine is UP, simply launch iChat. When you
RESTART your box, you should not have to disconnect
your camera, but if you SHUTDOWN the machine, you will
have to disconnect & reconnect the iSight to get it to
work on machines below Apples 700MHz threshold.

    My Machine Specs:
    400MHz Blue & White G3
    RAM 448mb 
    OS 10.3.2

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus