IOXperts Video 1.1.2a28 posted
Steve Sisak
steve.sisak at ioxperts.com
Mon Mar 19 00:22:41 EDT 2007
Available here:
<http://www.ioxperts.com/downloads/Video/Beta/1.1.2a29/>
<ftp://ftp.ioxperts.com/IOXperts/Video/Beta/1.1.2a29/>
This release expires April 19, 2007
This release properly sets gamma on the new Logitech cameras, which
should correct the dark image problem.
I may have located the cause of the crash that affects Skype and a
couple other applications -- if you were seeing that problem, please
test and let us know if this is the case.
----- changes in 1.1.2a29 -----
Fix to correct Gamma on newer Logitech cameras
Possible fix (and additional logging to detect) the Skype crash
Prefer YUY2 over MJPEG in UVC video mode selection
----- changes in 1.1.2a28 -----
1.1.2a28 extends the expiration date and includes a few minor
performance improvements.
I've also added some additional logging to try and isolate the
problem with the Philips SPC900NC not being detected after restart.
----- changes in 1.1.2a27 -----
Enabled Intel support for VLSI Vision CPiA-based Cameras
Use physically contiguous Isoch buffers on CPiA and Philips-based cameras.
Allow Isoch pipe reset when stopping stream -- should speed start/stop
----- changes in 1.1.2a26 -----
Added Intel support for cameras based on the Divio NW801 and NW802 chipsets.
Also fixed a few byte swapping errors in common code that may have
caused a few isolated problems.
----- changes in 1.1.2a21 -----
If you're having problems with crashes in Skype, this build _may_ help.
The primary change is that it holds off on some initialization of the
video pipeline until the as late as possible -- this may provide a
slight performance increase as well.
Hopefully there will be a matching Skype update to address the
threading issues we've been seeing.
The cause of the registration dialog popping up multiple times in
Skype is that Skype is opening and closing the digitizer multiple
times at startup -- this is not a problem, but somewhat annoying --
I'm looking at a fix to make the dialog appear only once per
application launch.
----- changes in 1.1.2a20 -----
1.1.2a20 adds support for Face Tracking on Intel-based machines.
In the process, we've done major work on the software pan/tilt/zoom
code which should result in improved performance, but should be
tested thoroughly for compatibility as there are significant
differences in the math.
----- changes in 1.1.2a18 -----
This is primarily to bump the expiration date as 1.1.2a17 expired
today, but we may have fixed a problem in the camera registration
code that could cause a camera to not be recognized under certain
circumstances.
For anyone who has one of the newer Logitech cameras and is having
problems with the audio, drop me a note off-list -- we have an audio
driver that works aroud the bug in the camera about ready for testing.
----- changes in 1.1.2a17 -----
This should fix the problems a few of you reported with the QuickCam
Pro 5000, Fusion, and (Black) QuickCam for Notebooks Pro.
The issue was that the firmware in those cameras returns incorrect
data for some of the controls related to the snapshot function, and
the driver caught and reported the error, unfortunately causing it to
fail on load with those cameras.
I've added code in the driver to work around the bug -- please
versify that the problem is fixed and that the fix didn't cause
issues with any other cameras.
There is still a known issue that the snapshot button on the new
Logitech cameras in not working -- I was hoping to get it fixed, but
didn't want to hold up getting something out with the previous
version expired.
---------
As always, please post any problems to the list.
--
_________________________________________________________________________
Steve Sisak, CTO steve.sisak at ioxperts.com
IOXperts, Inc. voice: +1 617 876-2572
87 Bristol St #3A fax: +1 617 876-2337
Cambridge, MA 02139 mobile: +1 617 388-6476
_______________________________________________
Video-Beta-Discuss mailing list
Video-Beta-Discuss at mailman.ioxperts.com
http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss
--
_________________________________________________________________________
Steve Sisak, CTO steve.sisak at ioxperts.com
IOXperts, Inc. voice: +1 617 876-2572
87 Bristol St #3A fax: +1 617 876-2337
Cambridge, MA 02139 mobile: +1 617 388-6476
_______________________________________________
Video-Beta-Discuss mailing list
Video-Beta-Discuss at mailman.ioxperts.com
http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss
--
_________________________________________________________________________
Steve Sisak, CTO steve.sisak at ioxperts.com
IOXperts, Inc. voice: +1 617 876-2572
87 Bristol St #3A fax: +1 617 876-2337
Cambridge, MA 02139 mobile: +1 617 388-6476
_______________________________________________
Video-Beta-Discuss mailing list
Video-Beta-Discuss at mailman.ioxperts.com
http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss
--
_________________________________________________________________________
Steve Sisak, CTO steve.sisak at ioxperts.com
IOXperts, Inc. voice: +1 617 876-2572
87 Bristol St #3A fax: +1 617 876-2337
Cambridge, MA 02139 mobile: +1 617 388-6476
More information about the Video-Beta-Discuss
mailing list