<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
Hello Steve,<br><br>I am attempting to use this updated driver with a 1.1 Serial Number purchased Jan 5. It is not recognizing any previous registration and when I re-enter my serial number it says "The serial number you entered is not valid for this device." Any ideas?<br><br>Thanks,<br>-Tom<br><br>> Date: Fri, 1 Feb 2008 10:38:18 -0500<br>> To: video-beta-discuss@mailman.ioxperts.com<br>> From: steve.sisak@ioxperts.com<br>> Subject: IOXperts Video 1.1.2a45 posted<br>> <br>> Available here:<br>> <br>> <http://www.ioxperts.com/downloads/Video/Beta/1.1.2a45/><br>> <ftp://ftp.ioxperts.com/IOXperts/Video/Beta/1.1.2a45/><br>> <br>> This release expires Mar 1, 2008<br>> <br>> I think we have the new serial number scheme is in place and new <br>> purchase with get a new (1.2) serial number -- this release should <br>> work with a 1.1 serial number and 1.2 serial numbers should work with <br>> any previous driver.<br>> <br>> I also may have fixed a crash where QuickTime was crashing if fed a <br>> 0-length MJPEG buffer.<br>> <br>> I'm hoping to have updater for 1.1 serial numbers working in the next <br>> couple of days -- for people who are actively testing, here's how you <br>> can get a free update:<br>> <br>> Pay attention to this list for an announcement when I have the <br>> upgrader available.<br>> <br>> eSellerate has a Preview mode where it will generate new serial <br>> numbers but not actually process a credit card transaction.<br>> <br>> When I post the next release, I will also post a certificate that <br>> will let you upgrade 1.1 -> 1.2 and leave it active for a few days so <br>> that the upgrade process gets tested and those of you who are <br>> actively testing will get the update for free.<br>> <br>> I'm not sure exactly when I'll have it available, but wanted to give <br>> everyone fair warning to be looking for the announcement.<br>> <br>> As usual, please report any problems.<br>> <br>> Thanks,<br>> <br>> -Steve<br>> <br>> ----- changes in 1.1.2a44 -----<br>> <br>> Bump expiration date, fix web page.<br>> <br>> <http://www.ioxperts.com/products/webcamx_1.2.html><br>> <br>> ----- changes in 1.1.2a43 -----<br>> <br>> This release is mostly to bump the expiration date before 1.1.2a42 expires<br>> <br>> I'm still working on the purchase and registration code, but made a <br>> number of improvements to the logging code so that it won't log <br>> anything (and fill up your hard drive) if you leave an expired demo <br>> running after the 30 minute limit.<br>> <br>> Also, this version is built with Xcode 2.5 (rather than 2.4.1) so <br>> that I can debug on both Tiger and Leopard.<br>> <br>> As always, please report any problems.<br>> <br>> Also, we've added updated compatibility notes on our website for <br>> Leopard and various previous operating system <br>> <http://www.ioxperts.com/leopard.html> -- please let me know if you <br>> see anything incorrect.<br>> <br>> (We're still cleaning up the pages, but figured is was better to have <br>> something close to correct posted rather than waiting longer)<br>> <br>> Happy New Year,<br>> <br>> -Steve<br>> <br>> ----- changes in 1.1.2a42 -----<br>> <br>> This is also primarily a regression test release as I've been <br>> cleaning up the purchase and registration code in preparation for <br>> doing a paid update.<br>> <br>> (If you're currently testing a demo version and are about to purchase <br>> a copy, please contact me off list as I could use some help verifying <br>> the process once it's ready)<br>> <br>> Also, I bumped the demo expiration date to 12/31 as the current betas <br>> expire in in 3 days on 12/15. Please speak up if there are any <br>> problems so they can be fixed before that happens.<br>> <br>> Known issues:<br>> <br>> 1) Installing over 1.1.2a38 or later will give "no cameras" -- <br>> reboot and reinstall to work-around (2nd install will work).<br>> <br>> ----- changes in 1.1.2a41 -----<br>> <br>> <br>> This is primarily a regression test and should be functionally <br>> identical to 1.1.2a39 except that I've done a major cleanup of the <br>> core logging code to allow better debugging of application <br>> initialization and IPC.<br>> <br>> I'd appreciate it if you could verify that no new bugs are introduced <br>> relative to a39 while I add code that takes advantage to the new <br>> functionaity.<br>> <br>> ----- changes in 1.1.2a39 -----<br>> <br>> Fixed a crash in the logging version of the driver for the divio <br>> chipset (passing a class instead of POD type to printf())<br>> <br>> ----- changes in 1.1.2a38 -----<br>> <br>> Change ioxdeviced from StartupItem to launch-on-demand launchd daemon.<br>> <br>> This fixes the problem with ioxdeviced quitting, resulting in no <br>> cameras being visible -- it also has a bit more logging in case there <br>> is still a problem.<br>> <br>> My suspicion is that the daemon was being loaded to soon and either <br>> getting in contention with one of the Apple drivers for the hardware <br>> or running before something was ready.<br>> <br>> Under Mac OS 10.4 and later, it is now registered with launchd and <br>> loaded only when the video digitizer is accessed by QuickTime, which <br>> will be much later.<br>> <br>> It will also be relaunched automatically if it falls over.<br>> <br>> One thing I did notice is that there may be an installer problem if <br>> you install 1.1.2a38 over itself -- in this case no cameras will <br>> appear in Camera Identifier. Please let me know if you see this <br>> problem, but you can work around it by rebooting and installing again.<br>> <br>> ----- changes in 1.1.2a35,36,37 -----<br>> <br>> bump expiration date.<br>> <br>> ----- changes in 1.1.2a34 -----<br>> <br>> This is functionally equivalent to a33, except that I've updated to <br>> the latest eSellerate SDK and added support for a few new Logitech <br>> cameras.<br>> <br>> ----- changes in 1.1.2a34 -----<br>> <br>> Update to latest eSellerate SDK<br>> <br>> Support for new Logitech cameras<br>> <br>> ----- changes in 1.1.2a33 -----<br>> <br>> Changes to Isochronous bandwidth allocation code and Isoc stream <br>> startup code to prevent stream from restarting when stopping<br>> <br>> ----- changes in 1.1.2a29 -----<br>> <br>> Fix to correct Gamma on newer Logitech cameras<br>> <br>> Possible fix (and additional logging to detect) the Skype crash<br>> <br>> Prefer YUY2 over MJPEG in UVC video mode selection<br>> <br>> ----- changes in 1.1.2a28 -----<br>> <br>> 1.1.2a28 extends the expiration date and includes a few minor <br>> performance improvements.<br>> <br>> I've also added some additional logging to try and isolate the <br>> problem with the Philips SPC900NC not being detected after restart.<br>> <br>> ----- changes in 1.1.2a27 -----<br>> <br>> Enabled Intel support for VLSI Vision CPiA-based Cameras<br>> <br>> Use physically contiguous Isoch buffers on CPiA and Philips-based cameras.<br>> <br>> Allow Isoch pipe reset when stopping stream -- should speed start/stop<br>> <br>> ----- changes in 1.1.2a26 -----<br>> <br>> Added Intel support for cameras based on the Divio NW801 and NW802 chipsets.<br>> <br>> Also fixed a few byte swapping errors in common code that may have <br>> caused a few isolated problems.<br>> <br>> ----- changes in 1.1.2a21 -----<br>> <br>> If you're having problems with crashes in Skype, this build _may_ help.<br>> <br>> The primary change is that it holds off on some initialization of the <br>> video pipeline until the as late as possible -- this may provide a <br>> slight performance increase as well.<br>> <br>> Hopefully there will be a matching Skype update to address the <br>> threading issues we've been seeing.<br>> <br>> The cause of the registration dialog popping up multiple times in <br>> Skype is that Skype is opening and closing the digitizer multiple <br>> times at startup -- this is not a problem, but somewhat annoying -- <br>> I'm looking at a fix to make the dialog appear only once per <br>> application launch.<br>> <br>> ----- changes in 1.1.2a20 -----<br>> <br>> 1.1.2a20 adds support for Face Tracking on Intel-based machines.<br>> <br>> In the process, we've done major work on the software pan/tilt/zoom <br>> code which should result in improved performance, but should be <br>> tested thoroughly for compatibility as there are significant <br>> differences in the math.<br>> <br>> ----- changes in 1.1.2a18 -----<br>> <br>> This is primarily to bump the expiration date as 1.1.2a17 expired <br>> today, but we may have fixed a problem in the camera registration <br>> code that could cause a camera to not be recognized under certain <br>> circumstances.<br>> <br>> For anyone who has one of the newer Logitech cameras and is having <br>> problems with the audio, drop me a note off-list -- we have an audio <br>> driver that works aroud the bug in the camera about ready for testing.<br>> <br>> ----- changes in 1.1.2a17 -----<br>> <br>> This should fix the problems a few of you reported with the QuickCam <br>> Pro 5000, Fusion, and (Black) QuickCam for Notebooks Pro.<br>> <br>> The issue was that the firmware in those cameras returns incorrect <br>> data for some of the controls related to the snapshot function, and <br>> the driver caught and reported the error, unfortunately causing it to <br>> fail on load with those cameras.<br>> <br>> I've added code in the driver to work around the bug -- please <br>> versify that the problem is fixed and that the fix didn't cause <br>> issues with any other cameras.<br>> <br>> There is still a known issue that the snapshot button on the new <br>> Logitech cameras in not working -- I was hoping to get it fixed, but <br>> didn't want to hold up getting something out with the previous <br>> version expired.<br>> <br>> ---------<br>> <br>> As always, please post any problems to the list.<br>> <br>> <br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br>> -- <br>> _________________________________________________________________________<br>> Steve Sisak, CTO steve.sisak@ioxperts.com<br>> IOXperts, Inc. voice: +1 617 876-2572<br>> 87 Bristol St #3A fax: +1 617 876-2337<br>> Cambridge, MA 02139 mobile: +1 617 388-6476<br>> _______________________________________________<br>> Video-Beta-Discuss mailing list<br>> Video-Beta-Discuss@mailman.ioxperts.com<br>> http://mailman.ioxperts.com/mailman/listinfo/video-beta-discuss<br><br /><hr />Helping your favorite cause is as easy as instant messaging. You IM, we give. <a href='http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join' target='_new'>Learn more.</a></body>
</html>