<HTML>
<HEAD>
<TITLE>1.1.2a47 working! &nbsp;Conflict report</TITLE>
</HEAD>
<BODY>
<BLOCKQUOTE><FONT FACE="Arial"><BR>
Hi All,<BR>
<BR>
Thanks for the latest release, havn&#8217;t tried it yet because I seem to have acquired a completely different problem with the Logitech camera.<BR>
<BR>
As said earlier, I would be getting a USB 2.0 card. &nbsp;Have now installed the Sonnet Allegro PCI card and have the camera plugged in directly.<BR>
<BR>
Have also bought the Elgato EyeTV 250 Plus which requires USB 2.0 and that is still working fine (though I can&#8217;t get the upgrade to EyeTV 3 because someone has already used the activation key to do that! and the TVTV subscription expired on 01/01/01! &nbsp;Am having words with the reseller tmrw ...)<BR>
<BR>
There is a reason for telling you this &#8211; in trying to upgrade to EyeTV 3, I needed to scan my invoice to send them a copy (no proof of purchase card in the box either &#8211; humph). &nbsp;Have a Microtek Scanmaker 6800 and in Tiger, was using the ScanWizard 5 driver. &nbsp;This does not work in Leopard and neither does the ScanWizard Pro 7 &nbsp;(SilverFast will work but is too expensive and apparently Microtek are looking into the matter ...).<BR>
<BR>
Anyway, after uninstalling both the Microtek scanner finder and SW5, the webcam started to work almost properly so there was a conflict with one or the other and my guess is it&#8217;s the scanner finder. &nbsp;Interesting but I guess not excessively helpful since no one will have those scanner drivers installed with Leopard if they have sense! &nbsp;However it might be worth keeping an eye on Microtek&#8217;s solution when it comes up with one.<BR>
<BR>
To return to my present troubles, apart from the window resizing problem which also occurs using VideoViewer, the image window suddenly acquired interruptions of green and purple fuzziness so I uninstalled everything and plugged the webcam into a different USB 2.0 port. &nbsp;However, upon checking that PhotoBooth was ok &#8211; it was not. &nbsp;The picture does not flash with green &amp; purple but it does flash and flicker constantly which it did not used to do.<BR>
<BR>
Meanwhile, EyeTV is working fine so am a bit stuck &#8211; it does not obviously appear to be the new card but am no expert.<BR>
<BR>
Any suggestions ?? &nbsp;Is the Belkin USB 2.0 card better ?? &nbsp;Is it the card&#8217;s fault ??<BR>
<BR>
Will install 1.1.2b1 when the camera has stabilised with the native drivers.<BR>
<BR>
Thanks in advance,<BR>
<BR>
James<BR>
<BR>
BTW: &nbsp;Am &#8216;telling&#8217; here but asked BTV if they could help with my previous camera &amp; software problems (lots of nasty crashes with button shutdowns) and they suggested the Macam driver might work &#8211; it didn&#8217;t even recognise the camera so IOX have the lead ... And I don&#8217;t begrudge the 20 bucks.<BR>
<BR>
Hang in there Carl &amp; Francisco, Steve &amp; the team will get it sorted, uncharted waters and all that ..</FONT></BLOCKQUOTE>
</BODY>
</HTML>